Work on PCI began at Intel circa 1990. PCI 1.0, which was merely a component-level specification, was released June 22, 1992. PCI 2.0, which was the first to establish standards for the connector and motherboard slot, was released on April 30, 1993.
PCI was immediately put to use in servers, replacing MCA and EISA as the server expansion bus of choice. In mainstream PCs, PCI was slower to replace VESA Local Bus (VLB), and did not gain significant market penetration until late 1994 in second-generation Pentium PCs. By 1996 VLB was all but extinct, and manufacturers had adopted PCI even for 486 computers. EISA continued to be used alongside PCI through 2000. Apple Computer adopted PCI for professional Power Macintosh computers (replacing NuBus) in mid-1995, and the consumer Performa product line (replacing LC PDS) in mid-1996.
Later revisions of PCI added new features and performance improvements, including a 66 MHz 3.3 V standard and 133 MHz PCI-X, and the adaptation of PCI signalling to other form factors. With the introduction of the serial PCI Express standard in 2004, motherboard manufacturers have included progressively fewer PCI expansion slots in favor of the new standard. Although it is still common to see both interfaces implemented side-by-side, traditional PCI is likely to slowly die out in coming years.
Comments